integrated non-pressure solar water heater

The vacuum tube absorb the sunlight strongly, at the same time,with the high quakeproof and the anti-hail ability.

Specification:

1. Inner tank material:SUS304-2B stainless steel

 2. Inner tank diameter and thickness:310mm/360mm/380mm(0.40mm)

 3. Outer tank material: the colour layer steel plate/galvanized steel

 4. Outer tank diameter and thickness: 420mm/460mm/480mm(0.31mm)

 5. Insulation layer: 50~55mm high density polyurethane foam

 6. Support material:1.5mm import heat zinc steel plate

 7. Heat collector material: three target tube(SS/CU/AL-coating)

8. Tube Quality: 12 to 36 tubes

9. Heater collector size: Φ47x1.5m/Φ58×1.8m

10. Glint plank angle of elevation:38/45 degree

Feature:

 1)The vacuum tube absorb the sunligts strongly, simultaneously with the high quakeproof and the anti-hail ability.

 2)Under the high temperature, the vacuum tube does not explodes.

 3)Making up the water automatically, decrease the troublesome of the artificially.

 4)With the promotion space, It can install the copper tube to be the  pressurized water tank.

 5)Increasing the superconductive heat pipe,making the water temperature is higher.

 6) The unique electric heating system realize the electric and the gas supplementary.

 7) The automaticity is high, but autocycle and automatic protection (overheated protection,leakage protection, frostproof circulation and so on)

Terms:

1. Payment terms: 30% in advance and 70% against  B/L  copy or 70%  by  L/C, 

                                   For sample T/T 100% in advance

2. Delivery terms: 10 working days after receiving deposit or original L/C.

3. Warranty: 7 years

4. Minimum quantity: 1 sets

integrated non-pressure solar water heater